Quick mold and die change for the sheet metal sector

Appliances

When it comes to quick mould or die changes, STAMPTEC is the ideal solution for the Appliance industry. Designed to change moulds on sheet metal deformation/shearing presses, it allows the piece to be held uniformly and without deformations for greater quality of finishes. In addition, with a simple impulse the mould is forcefully clamped on the upper and lower side of the press, without the need to partially or totally enter into the machine like when using mechanical brackets.

STAMPTEC is in fact interfaced with the press in such a way in order to ensure that machining starts only when the application of the piece is safe, optimising mould or die changes in terms of precision, speed and safety.

Some of our customers

Electrolux, Beko, Arcelik, Merloni, Vestel, Bosch, Matsuishita, Siemens, Keter, Braun, General Electric, Akplas, Elring Klinger, Sthil, Docol, Guzzini, Elica, Gewiss.

Building

The use of STAMPTEC on vertical sheet metal deformation/shearing presses facilitates and speeds up mould change operations, under the invisible control of the intrinsic safety of the permanent magnets and the magnetic flux which automatically calculates the size of the inserted mould and the quality of the contact (air gap), providing information about the specific workholding strength achieved on the mould.

Safety and speed do not depend on the experience of a machine operator, thus offering the ability to schedule mould or die change times. An important application advantage in the construction sector, which for years has relied on MAG-AUTOBLOK TECNOMAGNETE technology, including for rapid mould and die changes.

Some of our customers

General Electric, Geberit, Liebherr, Manitowoc, CNH, Caterpillar, Komatsu, Hyundai, Cimtas, Martifer.

Energy

Electrical connectors, details of solar panels and transformer sheets are just some of the products fabricated using a sheet metal deformation/shearing process on presses equipped with STAMPTEC.

Moulds and dies of any size and shape, including progressive moulds (even with scrap), are clamped quickly and precisely on the entire contact surface, avoiding bending and deformations. Uniform workholding makes the process more stable, reducing maintenance cycles compared to those required by traditional clamping systems. An application advantage of primary importance that makes this technology among the most widespread and appreciated among companies in the energy sector.

Some of our customers

Caterpillar, Bruck, Ina, Rollix, SKF, Galperti, PSL, Ventower, Valmont, G&E, Alstom, Vestas, RZK Celik, Gestamp Wind Steel, Martifer, RM Eolica.

Mechanical machining

STAMPTEC is the magnetic solution for the rapid change of moulds and dies on sheet metal forming/shearing presses. With a simple impulse the mould is clamped forcefully on the upper and lower side of the press, uniformly and without the need to partially or totally enter into the machine like when using mechanical brackets.

STAMPTEC is interfaced with the press in order to ensure machining starts only when the application of the piece is safe. An essential technology for companies that deal with mechanical processing, which can count on moulds and dies that are immediately aligned and perfectly locked in place for maximum operator safety.

Some of our customers

Man, Caterpillar, G&E, Deville Rectification, Est Aciers, Thyssen, Bobst, John Deere, Villares Metais, Gonvarri, Weg Motores, Ramada, Acos Bohler.

Shipbuilding and offshore

Companies in the shipbuilding and offshore sector need solutions for rapid mould and die changes that make machining processes efficient, fast, safe and sustainable.

For this reason, companies in this industry all over the world equip presses for sheet metal deformation and shearing with STAMPTEC, an ideal technology for both the machining of large sheet metals and the processing of small mass produced parts.

STAMPTEC, in fact, allows moulds of any size and shape, including progressive moulds (even with scrap), to be clamped quickly and with maximum precision with a magnetic action that acts on the entire contact surface, thus avoiding bending and deformations of the piece. Uniform workholding is one of the main application advantages of this solution because it makes the process more stable, reducing the numerous maintenance cycles required by traditional clamping systems.

Some of our customers

Fincantieri, Keppel, Hyundai, Bristol port, Chantiers de l’Atlantique, Blohm&Voss, CPW, Tuzla Shipyards, Vademsas, Damen, J. Ray Mc. Dermott.

Moulds and dies

Easy to implement on any type of press, STAMPTEC is the magnetic solution for the rapid change of moulds and dies on sheet metal forming/shearing presses, among the most used in mould making workshops around the world.

An impulse lasting just a few seconds is enough to perfectly clamp the mould or die on the upper and lower side of the press, with a uniform grip and without deformations, for optimal quality of machining work. Unlike when using mechanical brackets, with STAMPTEC there is no need to partially or totally enter into the machine during operation, an essential factor to ensure the safety of mould change operators. In fact, the solution interfaces with the press and ensures work begins only when the application of the piece is completely safe.

A real revolution for companies that deal with moulding, not only because it eliminates downtime for fixing brackets, adjustments and tests between batches, but also because it offers maximum performance in terms of precision, speed and energy savings.

Some of our customers

Magneti Marelli, Kantemir, Seco, Gonvarri, Tromosa, Simoldes, Polimold, Industrias Arteb, SCS, Meccanica Generale, Eurostampi.

Train and rolling stock

Large sheet metals with small parts are mass produced by a sheet metal deformation/shearing process on presses equipped with STAMPTEC.

Moulds and dies of any size and shape, including progressive moulds (even with scrap), are clamped quickly and precisely on the entire contact surface, avoiding bending and deformations. Uniform workholding makes the process more stable, reducing the maintenance cycles required by traditional clamping systems. With these advantages, STAMPTEC is also used in the train and rolling stock construction sector.

Some of our customers

Voest Alpine, Alstom, Tensol Rail, Bombardier, DB Bahn, SBB, Corus Cogifer, China Railway, RATP, Trenitalia, ATM Sampyo korea, Rail Corp Australia, Vossloch, Von Roll, SNCF, Okzan Demir, So.Co.Fer, O.m. Cinel.